Raleigh

Home » Locations » Raleigh
Raleigh2019-09-04T12:30:03+00:00

Raleigh Mold Inspection & Mold Testing

At AWA Environmental, we pride ourselves on performing high quality mold inspections and mold testing. As a leading company in mold inspections, our trained professionals have the knowledge, expertise, and training necessary to test for mold in your home. From various samplings and readings, to mold testing and reporting, we offer a range of services in Raliegh, NC.

AWA Environmental is a licensed, certified mold inspection company that serves cities all over the country. Before any of our inspectors can perform assessments they must first go through training. We offer only the best of the best to our customers. You can trust that our team of mold inspectors will provide quality work and top-notch service from beginning to end.

  • North Carolina Certified Mold Inspectors
  • We’ll respond within 10 minutes!
  • Our core focus is the safety of your home.

Schedule a Mold Inspection

We'll respond within 10 minutes!

NAME*

PHONE*

Zip Code*

E-mail

INTERESTED IN

Mold InspectionMold Testing

Our Raleigh
Mold Inspection
Services

  • COMPREHENSIVE VISUAL INSPECTION
  • MOISTURE READING
  • AIR SAMPLING
  • SURFACE SAMPLE
  • BULK SAMPLING

Mold Remediation vs Mold Inspection in Raleigh, NC

Mold remediation involves the removing, cleaning, and sanitizing of mold that is not supposed to be in a given location. Mold remediation also involves preventive measures taken to keep the mold from coming back once it is removed. In contrast, mold inspection involves looking for evidence of mold in a building and testing to see what kind it is. Mold inspectors search for mold inside walls and in other areas where mold is commonly found but not visible to the naked eye.

Mold is a minute fungus that grows in areas that are warm and moist, particularly in areas where there is a large supply or oxygen and organic matter. Since these conditions are quite common, mold can be found almost anywhere. Raleigh, North Carolina is one area that provides the right conditions for mold spores to thrive. Outdoor mold is essential to most ecosystems because the break down leaves and dead plants and fertilize the soil, but indoor mold is mostly just a nuisance. It smells bad, looks unsightly, and some varieties can cause health problems. Mold enters a building as mold spores in the air, but these spores eventually settle onto a surface and establish a colony. Basements, kitchens, and bathrooms are the most common places to find mold because these areas tend to have the most moisture.

The important thing to consider is that it is often preferable to keep the mold test and remediation separate. Mold remediation specialists have a built-in bias when they act as mold inspectors because they will make more money on the job if they identify mold. There is a chance that they will say there is harmful mold when there isn’t, or they will exaggerate on how bad the mold is. Since the job of a mold inspector is just to identify whether or not there is mold, they have no reason to lie or exaggerate. In fact, some states like Texas, New York, and Florida have laws in place to prevent the professional who performs the mold inspection to also perform the mold removal. For example, in Florida, they prohibit the task of remediation and the task of mold inspection from being done by the same company because they consider it a conflict of interest.

  • IAC2 Certified

AWA is the right choice when it comes to the safety of you and your family

1

Comprehensive Mold Inspection

AWA will send one of our inspector’s that are all licensed in the state of North Carolina out to your home. If remediation is necessary, the inspector will recommend professional remediation and can provide protocol if necessary.

2

Mold Remediation & Removal

You’ll have a licensed mold remediation company in the state of Texas come to your home and perform mold removal.

3

Pass a Post Remediation Inspection

AWA will send to your home one of our inspector’s that are licensed in the state of North Carolina to come out and perform a post remediation clearance inspection to verify the work is complete.

4

Receive Certificate of Mold Damage Remediation

Upon your home passing the post remediation clearance inspection, AWA will issue a Certificate of Mold Damage Remediation.

The Importance of Using a Quality Mold Inspector

Less dangerous varieties of mold are classified as allergenic, while more dangerous varieties are classified as either pathogenic or toxigenic. Mold exposure can cause sneezing, memory problems, fatigue, muscle aches, sinus problems, vertigo, and more. Because the symptoms are so variable and often overlap with other conditions, they’re not a good way to identify whether your house has a mold problem. Instead, you need someone who specializes in finding and identifying mold to asses the situation. You typically want an mold inspection if you are aware of recent water damage, you see visible mold growth, you smell something strange, you start having unexplained health issues, or you’re about to undergo a real estate transaction.

In some cases you can tell if there is mold because you see or smell signs of it, but a quality mold inspector is still useful. A good mold inspection can help you figure out what the extent of the mold damage is. This may require additional testing, which can cost more money but at the same time save you a lot of money and headache or give you peace of mind. Sometimes, the mold can be dangerous. We always recommend speaking with a doctor and showing them any test results from a mold inspection if you are concerned with your health. You need a company that is honest and transparent. Before you decide to hire a mold removal service, you want to have a crystal clear picture of what the situation is. What type of mold do you have in the house. Where is the mold? What is the concentration of mold spores? This will provide you with the information you need to know whether you need mold remediation and allow you hunt for service that fits your exact needs.

The Inspection Process

There are three methods commonly used to test for black mold and other harmful mold varieties: air testing, surface testing, and bulk testing. The air testing process involves identifying the concentration of mold spores in the air. Almost every home in the Raleigh area will have mold of some variety because it occurs naturally in North Carolina’s ecosystem. What differs from one home to the next is the concentration, as well as the mold varieties. The benefit of air testing is that you can identify mold in the house even if you can’t smell or see it.

Surface testing involves taking a sample from a household surface, such as a wall. The sample is either taken with a swab or lifted with tape. Later, the samples are examined in a laboratory so that the mold variety can be identified. The biggest downside is that surface testing doesn’t tell you what concentration of spores there are in the air.

Bulk testing involves testing large pieces of material, such as carpet or wallpaper. Once the material is collected, it is brought to a laboratory. Analysts study the material under a microscope to determine if mold is present. If mold is detected, the analysts identifies the genus of mold and figures out what the concentration of mold is. The drawback of bulk testing is that it tells you nothing about mold spores in the air.

If you are in the Raleigh, NC area and suspect that your home might be contaminated by mold, you need an inspection to determine whether you have a mold problem. If you have a mold problem, a thorough inspection will provide you with the information you need to make an educated decision about how to resolve the problem.

AWA Environmental did a great job for us! They were timely and very thorough. I received a copy if the lab report which substantiated the existence of mold as well as describing the type and amount. I would highly recommend AWA to anyone who suspects mold.
Dolores Lackey
I had a great experience with AWA Environmental. The mold inspection was very professional. I had allergies driving me crazy for a few months and I suspected my home had mold.AWA was able to get out to my house very fast. They found black mold underneath my two of my sinks that I never noticed! Thank you AWA!!!
David Jacobs
I had Adam from AWA come out and inspect my home. He was very informative and patient in helping me understand the entire process. The work he did was thorough and I received my results in a very timely manner. I would definitely recommend this company and will be using them again in the future.
Haley Pennington
Will was thorough and professional. Would recommend AWA Environmental for anyone in the Houston area looking for a mold inspection.
Andrew Schmeerbauch
My experience with AWA was easy and professional. Mr.Will Bench answered all my questions with easy and not once was bothered. As a new home owner things can get confusing and frustrating. I can honestly say I came in frustrated with all that was going into play and left bliss with just Will being accommodating and cool. Thank you Will!!!!!
Juliet Lopez
AWA has been keen to coordinate the most efficient and cost effective protocols with the client and remediator. Their services not only provide effective mold detection and remediation protocols but also try to work with the homeowers/remediator to minimize the impact of mold remediation protocols on their homeowner's lives.
John Rydlund
AWA Mold inspectors are very professional and pleasant to work with. The service response is very prompt! Highly recommend this company.
Tejano Center for Community Concerns, Inc
Adam Horas with AWA Environmental is a true professional. I had to coordinate a mold inspection on a property I own in the Houston area and Adam went out of his way to accommodate me. I couldn't have asked for a better experience. I highly recommend AWA Environmental for their expertise in the field as well as the outstanding customer service they provide. This is an OUTSTANDING company and Adam will take great care of you!
Hap Fairhart